If you’re looking for a mid-range PC case that can handle a lot of airflows, the NZXT H1 has you covered. But, as it’s a pretty big computer case, you may find it trickier to open it up without breaking something.
Fortunately, this article will give you step-by-step instructions on how to work your way through opening the whole case.
What are the parts of the NZXT H1 PC Case?
Assuming you’re talking about the NZXT H1 PC case, it consists of 4 main parts:
The chassis is the main frame of the case to which everything else is mounted. It’s usually made from steel or aluminum.
The motherboard tray – this is where your motherboard will sit. It’s usually removable, so you can easily install or replace your motherboard.
You’ll install your hard drives, SSDs, and optical drives in the drive bays. There are usually multiple drive bays of various sizes to accommodate different types of drives.
The power supply provides power to all the components in your PC. It mounts to the back of the chassis and plugs into an AC outlet.
How do you open the NZXT H1 case?
If you’re looking to build a PC using the NZXT H1 case, you may wonder how to open it. Here’s a quick guide on how to do just that.
First, locate the two thumb screws on the back of the case. These are located near the top, just above the I/O panel. Once you’ve found them, use a Phillips head screwdriver to loosen and remove them.
With the thumb screws removed, you should now be able to pull back on the top panel of the case gently. It will come off easily, revealing the internals of the case.
Now that you have access to the internals, you can start installing your components. Make sure to follow all manufacturer’s instructions when doing so.
And that’s all there is to it! You can easily open up your NZXT H1 case with a few simple steps and start building your dream PC.
What is inside the NZXT H1 case?
Assuming you want the full list of NZXT H1’s internals:
The case is divided into three main sections: the motherboard tray at the top, the power supply and drive cage at the bottom, and the graphics card in the middle.
On the motherboard tray, there are 4 standoffs for your Mini-ITX motherboard. There is also a pre-installed I/O shield, which is a nice touch. The CPU cooler cutout is large enough for most aftermarket coolers. There are 2 cable management routes with grommets and plenty of tie-down points. Overall, it’s a very well-thought-out design.
The power supply and drive cage sit at the bottom of the case. The power supply is fully hidden, giving the case a clean look. The drive cage can hold 2x 3.5″ drives or 2.5″ drives. Removing the drive cage entirely is possible if you don’t need it.
The graphics card sits in its dedicated chamber in the middle of the case. This helps to minimize thermal throttling and keeps your GPU cool even under heavy loads. There is plenty of room for even the longest graphics cards on the market today.
All told, NZXT has done an excellent job with the H1’s internals. Everything is well-designed and thought out, and there’s plenty of room for even high-end hardware.
What are the sizes of an NZXT H1 PC case?
The NZXT H PC case is available in two sizes:
- The Standard size is 21.8″ x 9.4″ x 17.7″ (HxWxD) and weighs 16.1 pounds.
- The Large size is 25.6″ x 10.9″ x 18.3″ (HxWxD) and weighs 20.3 pounds.
Are there any tools needed for opening an NZXT H1 PC case?
Opening the NZXT H1 PC case is a simple process that requires no special tools. To begin, locate the two thumbscrews on the back of the case near the top. These thumbscrews secure the top panel of the case to the main chassis.
Next, find the release button for the front panel on the bottom-left side of the front bezel. Press and hold this release button while simultaneously pulling on the front bezel to remove it from the case.
With the top panel and front bezel removed, you will now have full access to all components inside your NZXT H1 PC case. To remove these components, simply unscrew any screws holding them in place and carefully pull them out of the case.
When you’re finished working inside your NZXT H1 PC case, simply reverse these steps to reassemble it.
Parts and Features of the NZXT H1 PC Case.
The NZXT H PC Case is a great choice for a quality computer case. It features a sleek, black design with plenty of space for all your components. The front panel has two USB 3.0 ports, audio jacks, and power/reset buttons.
On top of the case is a large fan grill with room for up to three 120mm fans. The back of the case has room for a 120mm or 140mm fan, and there are also two grommeted holes for routing cables. The bottom of the case has four rubber feet that keep it elevated and help reduce vibration.
Inside the case, there is plenty of room to work with. The motherboard tray has cutouts for easy accessibility to all your components, and there is even a CPU cooler support bracket that helps prevent sagging over time.
There are seven expansion slots, so you can easily add more graphics cards or other expansion cards down the road. The power supply bay is located at the bottom of the case and can accommodate standard ATX PSUs up to 160mm in length.
Overall, the NZXT H PC Case is a great option for anyone looking for a high-quality computer case with plenty of features and space for all its components.
We hope this guide on how to open the NZXT H1 PC case was helpful! If you have any other questions or want more tips on building a gaming PC, check out our other articles. Building your gaming PC can be a fun and rewarding experience, so don’t be afraid to try it!