How To Reset Motherboard

When you need to reset a motherboard, there are a few things you need to keep in mind. Firstly, know exactly what the problem is and what steps you should take to fix it.

Secondly, take the necessary precautions, like turning off your computer, before performing any risky tasks. Thirdly, be careful not to let the power cord come into contact with anything metal because it could cause serious damage!

How to Reset a Motherboard?

If your motherboard is not booting up or you experience other problems with your computer, you may need to reset it. This guide will show you how to do that. 

Before performing a motherboard reset, back up any important data on the computer. A reset will delete all of your data, programs, and settings. 

To perform a motherboard reset: 

  1. Turn off the computer and unplug all cables from the power supply. 
  2. Remove the screws that hold the cover and remove them. 
  3. Locate and remove the BIOS battery (if present). 
  4. If a processor microcode update is available, download and install it before proceeding. 
  5. Restart the computer by pressing the power button and turning it on while holding the F2. 

During startup, look for a message that tells you to press a specific key to enter setup or boot menu items (usually, only one key is listed).

If you don’t see this message, try pressing multiple keys at once until one of them works. Once you see this message, press Esc to clear it and continue with step 6 below… 

6a.. Press F10 to restart your computer in normal mode (not Safe Mode). If prompted by your operating system, choose your language settings and keyboard layout (usually the United States), then click OK. 

See also  How To Find Your Motherboard’s Serial Number

The Danger of Resetting a Motherboard

If you are having problems with your motherboard, there is a very good chance that you have inadvertently reset it.

This can result in corrupted data and even permanent damage to your computer. Before trying to reset your motherboard, make sure you have a backup of all your data and hardware configurations. Here are four ways to reset a motherboard:

  1. Use the CMOS clear button on the back of the motherboard. This will bypass existing settings and restore the board to its default state.
  2. Hold the power button for ten seconds to disable power to the board.
  3. Remove all peripheral devices and then reconnect them one at a time in reverse order. Once all devices have been re-attached, try turning on the computer and see if it boots up properly. If not, try step 4).
  4. If step 3 fails, remove only one device at a time and test each connection before proceeding to the next device. Once all devices have been tested and failed, remove them completely and attempt step 3 again.

Why should you Reset the Motherboard?

There are numerous reasons why you may need to reset a motherboard. In some cases, the board may be experiencing an issue that needs to be addressed as soon as possible.

A reset may be necessary to clear any corrupted data or invalid settings. Ultimately, a motherboard reset will restore your computer’s operating system and other essential software to its default settings.

If you’re experiencing an issue with your computer, it’s important to take immediate action. You can resolve any underlying problems by resetting the motherboard and getting your computer back up and running as quickly as possible. Here are some tips for performing a motherboard reset:

See also  How To Upgrade To A New PC Case?

If you’re having difficulty booting your computer or have recently updated your BIOS or drivers, try reinstalling them from scratch.

If that doesn’t work, try performing a hard drive or memory upgrade to clean up any potential issues before attempting a motherboard reset. Finally, check for any updates or patches available for your operating system and install them if necessary.

The Benefits of Resetting a Motherboard

If your motherboard is not booting up or if it is not functioning properly, it may be time to reset it. A motherboard reset can fix many problems and restore your computer to its original condition. Here are the benefits of resetting a motherboard:

  1. Resets the computer and restores factory settings.
  2. Fixes many common problems, including the computer not starting, inoperable keyboard or mouse, and blue screen of death.
  3. Can correct errors that can cause system instability and data loss.
  4. It May help resolve issues with overclocking or gaming performance.
  5. Improves computer speed by clearing outdated files from the hard drive.

Tips for Resetting a Motherboard

If your motherboard is not starting up or you think it might have a problem, resetting it can fix the issue. Resetting a motherboard should only be done if there is no other solution, such as troubleshooting steps.

There are different reset methods, so select the one best suits your motherboard and situation.

How To Reset Motherboard: 

  1. Remove all external devices from the computer, including the power cord. 
  2. Disconnect all cables connected to the motherboard (including graphics cards and hard drives). 
  3. Wait five minutes after disconnecting all cables before powering the computer. 
  4. After five minutes, turn on the computer and connect an external monitor to one of the available ports. 
  5. Open a command prompt window by pressing “Windows + R” and typing “cmd.” (For Mac users: hold down “Ctrl” while clicking “Go” in the Apple menu bar and then type ” Terminal. ” Then press Enter.) 
  6. In the command prompt window, type “reset.” (For Mac users: hold down “Command” while clicking “Go” in the Apple menu bar and then type ” Terminal. ” Then press Enter.) 
  7. The BIOS will automatically reboot after resetting. After rebooting, check for errors with your computer’s boot manager or CMOS by typing “bootrec /fixmbr.”
See also  Can Running Games at 100% GPU Usage Harm Your PC? Find Out Here

Frequently Asked Questions

What is a motherboard?

A motherboard is the central component of your computer, and it’s responsible for connecting all the other components. It also provides power to your other hardware and keeps everything organized. If your motherboard stops working correctly, you may need to reset it to get your computer back up and running. 

How do I change my motherboard?

Most motherboards are held in place with screws and can be accessed from the back of your computer. Once you’ve removed the screws, you can remove the motherboard from your computer. Be sure to save all of the original documentation that came with your motherboard in case you need to reinstall it later. 

What are the benefits of upgrading my motherboard?

Upgrading your motherboard can improve the performance and stability of your computer. Additionally, new motherboards come with various features that may interest you. If you’re unsure whether an upgrade is right for you, consult your computer’s manufacturer.

Conclusion

If your computer is not starting up or is displaying unusual symptoms, it might be time to reset the motherboard.

This relatively easy process can help resolve some common problems with your computer. Before you begin, back up any important data and document your steps to restore your system if necessary.


Share post on
Matt Wilson
By Matt Wilson

Matt Wilson is a PC gaming and hardware expert with years of experience. He's a trusted tech product reviewer for gamers and tech enthusiasts.


PCedged is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

Knowledge Base

Tips to Lower Your Internet Bill

 Everyone needs a good home internet connection today. However, a good internet is anything...

By Matt Wilson
Updated
How To Add More SATA Ports To Your Motherboard? Knowledge Base

How To Add More SATA Ports To Your Motherboard?

SATA, which is short for Serial Advanced Technology Attachment, is the current industry standard...

By Matt Wilson
Updated
Test Motherboards Without A CPU Knowledge Base

Test Motherboards Without A CPU

The motherboard is one of the most important components in any computer. It connects...

By Matt Wilson
Updated
Can PCI-E X4 Card Fit In X16 Slot? Knowledge Base

Can PCI-E X4 Card Fit In X16 Slot?

There are many questions that a PC builder may be asking when trying to...

By Matt Wilson
Updated
How To Buy Used Graphics Cards? Find Out the Solution Knowledge Base

How To Buy Used Graphics Cards? Find Out the Solution

Recently, I was looking to purchase a graphics card for my PC but needed...

By Matt Wilson
Updated
How To Test RGB Fans Without Motherboard Knowledge Base

How To Test RGB Fans Without Motherboard

RGB fans are the latest trend in computer hardware. They have a fan blade...

By Matt Wilson
Updated
Upgrade Your Minecraft Experience with These Powerful Graphics Cards! Knowledge Base

Upgrade Your Minecraft Experience with These Powerful Graphics Cards!

Minecraft is one of the most popular video games of all time for a...

By Matt Wilson
Updated
What Is a Discrete Graphics Card and Why Do You Need One? Knowledge Base

What Is a Discrete Graphics Card and Why Do You Need One?

A discrete graphics card is a specialized hardware designed for gaming and other high-performance...

By Matt Wilson
Updated